• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Valve cover gaskets

Share this page

B

BWillis

Jedi Knight
Offline
How many times can a cork gasket be reused if it was installed with gasket shellac? I need to recheck my valve clearances because things have begun to chatter a bit. This will be the second time that I've had the valve cover off. I guess I need to order a few extras to have on hand anyways.
 
Ben, you only glued it to the cover, right?? If so, use it until it starts to leak. Avoid overtightening the hold down bolts to get a leaky one to seal.
If you glued it to both the cover and the head, you are well and truly boned. /bcforum/images/%%GRAEMLIN_URL%%/grin.gif
Jeff
 
The trite answer... Until it starts leaking?

I think I've removed the valve cover on my car 5 or 6 times to adjust valves and such - still not leaking...

cd
 
And it should not leak with a proper install.
 
I was able to open and close mine about six times before the gasket started sticking to the head.

I have wanted to try a silicone gasket, but I am going to let that one wait until I put on the alloy cover I have.
 
Back
Top