• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A Unmarked SU jet needles?

Share this page

K

karls59tr

Yoda
Bronze
Offline
Building carbs on the work bench. Is there any way I can tell if a jet needle is lean or rich? Bought them some time ago and they came unmarked. Do the needles all come unmarked now? Did they not used to come with markings at the top?
 
I recently bought a genuine SU rebuild kit from MM. The mark was so poorly done, to avoid bending the needle, I had to file off the burr around the ID. For it's sure I knew the size! LeT
 
If they really aren't marked, then the only way I know is to measure at each station, and compare the measurements to a chart or a known needle.
 
Back
Top