• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Unimat SL 1000

Share this page

kyreb1862

kyreb1862

Jedi Knight
Offline
Anybody know anything about these little machines? I picked up one this weekend for $40. It has the milling setup with it and looks to be a handy little piece of hardware.
 
What the heck is it. Pic or a link would be cool.
 
I ran across this site. It looks like this guy has parts and a manual available.

I'd say you really did good for $40. :cheers:
 
Great little table top machine tools. Very high quality - you got a bargain in my opinion.

You can also look at the Micro-Mark catalog/web site for consumables (cutters, etc) and the Sherline web site. (I'd say that Sherline is sort of the modern Unimat although there's no actual connection that I know of.) Also, see https://secure.villagepress.com/store for publication (Including Home Shop Machinist magazine). There are a zillion web sites covering projects made with machines like this.

I have a benchtop Sherline mill & lathe that I frequently use for making small bushings, spacers, etc.
 
Back
Top