• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Unimat SL 1000

Share this page

kyreb1862

kyreb1862

Jedi Knight
Offline
Anybody know anything about these little machines? I picked up one this weekend for $40. It has the milling setup with it and looks to be a handy little piece of hardware.
 
What the heck is it. Pic or a link would be cool.
 
I ran across this site. It looks like this guy has parts and a manual available.

I'd say you really did good for $40. :cheers:
 
Great little table top machine tools. Very high quality - you got a bargain in my opinion.

You can also look at the Micro-Mark catalog/web site for consumables (cutters, etc) and the Sherline web site. (I'd say that Sherline is sort of the modern Unimat although there's no actual connection that I know of.) Also, see https://secure.villagepress.com/store for publication (Including Home Shop Machinist magazine). There are a zillion web sites covering projects made with machines like this.

I have a benchtop Sherline mill & lathe that I frequently use for making small bushings, spacers, etc.
 
Back
Top