Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
histerical
Jedi Hopeful
Offline
Aluminum bumpers ?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Trunk Lid
- Thread starter SaxMan
- Start date
Share this page
Shot the trunk pan and clear coated it over the last 24 hours. Had an issue with the clear coat coming out cloudy on one of the bumper brackets. It made a huge mess trying to fix the problem. Fortunately, it is on the side facing the fender and not really visible. Time to put the car back together tomorrow.
Next stop: Firewall in the driver and passenger footwells. That will be the last of the summer projects.
Next stop: Firewall in the driver and passenger footwells. That will be the last of the summer projects.
I'm calling this part of the project done. Didn't turn out that great, but the main thing was to kill the corrosion.
Primer coat applied:
DSC_0021 by David Cohen, on Flickr
Now the base coat:
DSC_0040 by David Cohen, on Flickr
Base coat:
DSC_0041 by David Cohen, on Flickr
Clear coat -- I had a lot of problems with the clear coat, no doubt due to the humid conditions in Maryland.
DSC_0045 by David Cohen, on FlickrDSC_0045 by David Cohen, on Flick
Got the bumper back on -- this was a bigger pain than removal. The deformed trunk floor on the left side made the brackets and bolts very hard to line up.
DSC_0048 by David Cohen, on Flickr
And the lid goes back on. I still have to do some buffing to even out the clear coat:
DSC_0049 by David Cohen, on Flickr
Once everything is back in the trunk, most of the imperfections are hidden. As you can see, I try to cover just about any eventuality. There's also plug wires, jumper cables and a fan belt stored on the inside of the wheel:
DSC_0053 by David Cohen, on Flickr
On to the footwells. That will be my last of the summer projects.
Primer coat applied:
DSC_0021 by David Cohen, on FlickrNow the base coat:
DSC_0040 by David Cohen, on FlickrBase coat:
DSC_0041 by David Cohen, on FlickrClear coat -- I had a lot of problems with the clear coat, no doubt due to the humid conditions in Maryland.
DSC_0045 by David Cohen, on FlickrDSC_0045 by David Cohen, on FlickGot the bumper back on -- this was a bigger pain than removal. The deformed trunk floor on the left side made the brackets and bolts very hard to line up.
DSC_0048 by David Cohen, on FlickrAnd the lid goes back on. I still have to do some buffing to even out the clear coat:
DSC_0049 by David Cohen, on FlickrOnce everything is back in the trunk, most of the imperfections are hidden. As you can see, I try to cover just about any eventuality. There's also plug wires, jumper cables and a fan belt stored on the inside of the wheel:
DSC_0053 by David Cohen, on FlickrOn to the footwells. That will be my last of the summer projects.
histerical
Jedi Hopeful
Offline
I'm sorry, but this is a new one for me. Honestly, I don't think I have ever heard of Aluminum bumpers. Am I missing something or are you just alluding to their weight ?
Maybe it's just the weight and the complete lack of corrosion on the insides of the bumpers. I expected to see some surface rust...but nothing, nada. When I cleaned it with a wire brush, it cleaned up like an aluminum rim from a bicycle. Maybe it's not aluminum, but it is definitely an alloy that has similar properties.