• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Transmission Mount Replacement

Share this page

JohnnyMead

JohnnyMead

Jedi Trainee
Country flag
Offline
I'm going to replace the transmission mount on my TR3A. Should I get it out by taking out the cross plate that it mounts on, or is there a better/easier way? Its a non-overdrive.
Thanks,
John
 
On my 4A cross piece and exhaust hanger had to come out also, also a strap from the shifter is in there. I did from bottom, kinda tight. Would be much easier from top except gearbox cover and all that would need to come off.
 
Thanks Richard. I did take the cover off so that I could clean out the crud and see the parts little better. I dug out a lot of muck.
 
Back
Top