• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Transmission BN2 with 28/1292 overdrive

Leew

Senior Member
Offline
I bought a 58 100/6 with transmission issues...only the normal, noisy 1st and reverse

However the seller kindly sent me a spare transmission ( BN2 ) an Overdrive Laycock de Normanville S/No 28 /1292/5152 ( with adaptor plate ) and as I read is suitable for a 100 along with the bell housing

I have decided to have my existing transmission and overdrive restored so I was trying to determine before I advertise the spare ( which has also been refurbished ) to which models this BN2, Series 28/1292 overdrive, adaptor plate and bell housing would be suited?

I am assuming, given that it has a 100 overdrive it would be more suited to early cars, say up to 1956

Any advice would be appreciated
 
Last edited:
Sounds like what you have is complete from bellhousing to drive flange. That would be a direct replacement for any BN2. It would also be capable of being retrofit to a BN1. There would some OD rewiring to be done, trans mounts to fit and, I believe, a slightly longer driveshaft needed. This is not an uncommon swap.
 
Back
Top