-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Wedge TR7 PI Relay ECU etc locations
- Thread starter Got_All_4
- Start date
Share this page
OP
Got_All_4
Luke Skywalker
Offline
Here's what is happening. Without the relay in and jumping the brown power wire to the light green and white & green wire (goes to the fuel pump motor) the pump runs.
I took the cover off the relay and plugged it into the harness then turned the key on. The one side (I think the right side) of the relay made contact. Then turned the starter on and the other side made contact. Hummm, maybe one of the circuits in the boards is bad?
I took the cover off the relay and plugged it into the harness then turned the key on. The one side (I think the right side) of the relay made contact. Then turned the starter on and the other side made contact. Hummm, maybe one of the circuits in the boards is bad?