• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 TR6 wiper cable and greasing it

Share this page

hondo402000

hondo402000

Darth Vader
Offline
has anyone greased the wiper cable in their tr6 an does the cable come out with out getting under the dash andtaking the wheel boxes apart, not that I drive in the rain going to the bently manual as I post this

hondo
 
so I was thinking if I take the wipers off can I pull the cable out and will the wiper shafts just keep going round and round till the cable comes out? it just looks like a gear in the wheel box housing and doesnt appear to have a stop


maybe I will try it and see if it works
 
That's the way it's supposed to work. You may not even need to remove the wiper arms, if they are the kind that will lift to straight out. The cable just pulls out while the wiper boxes go round and round.
 
well got the cable out, took the wiper unit apart to regrease and PO has a nylon cable tie holding the plastic connector to the housing, the plastic connector has the automatic cut off switch, I figured there must be some type of clip that held it on the metal housing but I cant see what is broken off so I guess I will have to go back to a nylon tie. but so far so goood
 
Hondo.....I'm not sure what clips you're looking for but here's a picture of my wiper motor opened up before I removed, greased and painted it. I've got a few more pictures if you think they will help.

WiperOpened.jpg
 
underneat the housing where the wiring harness attaches to the unit is a plastic part that the harness plugs into that is what is loose but I got it covered would attach pics but I dont see an attachement button, but got the unit regreased and back in this pic is just of the gear housing after cleaning the grease out
 

Attachments

  • 16219.jpg
    16219.jpg
    46.7 KB · Views: 270
hondo402000 said:
...would attach pics but I dont see an attachement button, ...
Click to expand...

When you make a post, at the bottom is something called the "File Manager". Click on that, and you can attach pics. Watch out for the size, as there is a limit. I usually make them 500x375.
 
and windows xp you can resize photos but so far in vista there is no such program as I can find so I had to crank up my XP computer
 
Bobby
I put that black stuff between the plastic electrical housing and the metal base to keep moisture out of the gear housing, its NAPA non hardening sealer and the wire is coat hanger wire bent as a clip to hold the plastic housing in place, I drilled 2 holes opposite each other in the cast web for the attachement holes thats the best I could do,
 
hondo402000 said:
and windows xp you can resize photos but so far in vista there is no such program as I can find so I had to crank up my XP computer
Click to expand...
Download IrfanView (which is freeware). https://www.irfanview.com/ It runs on Vista, and has all sorts of options for resizing. Not quite as seamless as the functions built into XP, but works quite well once you learn to use it.
 
Back
Top