• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 TR6 turn indicator not working

Share this page

I

ichthos

Darth Vader
Country flag
Offline
I finally got my windsheild in and took it on my first adventure on the freeway - what a rush! The only downside was my turn indicator is suddenly not working. I checked the bulbs and connections. I had an extra flasher unit on the passenger side that I swapped and still nothing. The emergency flashers work. All the lights, including the brakes. The turn signal switch would not return (wearing out?) before this, but it would at least do the job. Is there a way to test the switch? If so, how do I test it? Is there anything else I could check?
Thanks, Kevin
 
The turn signal switch correcting arm is made of plastic and wore out shortly after the car left the showroom floor.
The hazard lights work, so your grounds are good at the lights.
Take a test light to find out where the current stops. Start at the switch, work your way through the entire circuit. Check into the flasher and coming back out. When the light stops lighting, you have found your problem area. Follow your wiring diagram to know where the circuit travels.
 
Back
Top