-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR6 tr6 su conversion
- Thread starter rjc157
- Start date
Share this page
LBCs_since_1988
Jedi Hopeful
Offline
Are you using HS6 carbs? There should be a vacuum port on the front carb.
poolboy
Yoda
Offline
What year car ? I probably should ask what distributor ?
If the module you are concerned about is on the cockpit side of the dizzy, it's a vacuum retard.
In that case don't worry about it. Once your engine gets past 1100 rpms vacuum has dropped and the centrifugal advance weights are taking over the timing.
If the module you are concerned about is on the cockpit side of the dizzy, it's a vacuum retard.
In that case don't worry about it. Once your engine gets past 1100 rpms vacuum has dropped and the centrifugal advance weights are taking over the timing.