D
Deleted member 8064
Guest
Guest
Offline
TR6 Startup up-date
Well I finally got around to start the TR6's engine today. After my friend Percy (he's into MGs) helped me connect things together we cranked it and it would sputter quite a bit and die.....Then we used the choke ("DUH") that really helped, but once it warmed up it would stall. The car would start upon squirting fuel into the carbs and a few seconds later it would stall. The carbs started leaking thru the bottom...any suggestions besides the O-rings/seals on the bottom of the carbs. These carbs were rebuilt about 4 years ago by me (no wonder) and were stored.
Any advice appreciated. And thanks for the oil and startup reccomendations.
Vic
73 TR6
Guayama, PR
Well I finally got around to start the TR6's engine today. After my friend Percy (he's into MGs) helped me connect things together we cranked it and it would sputter quite a bit and die.....Then we used the choke ("DUH") that really helped, but once it warmed up it would stall. The car would start upon squirting fuel into the carbs and a few seconds later it would stall. The carbs started leaking thru the bottom...any suggestions besides the O-rings/seals on the bottom of the carbs. These carbs were rebuilt about 4 years ago by me (no wonder) and were stored.
Any advice appreciated. And thanks for the oil and startup reccomendations.
Vic
73 TR6
Guayama, PR
Hey Guest!
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 