• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 TR6 rear wing to rear deck fit.

Share this page

TR6oldtimer

TR6oldtimer

Darth Vader
Country flag
Offline
Unfortunately I did not take pictures of this area of the body before disassembly. So I need advice on what you all think is acceptable or normal for the mismatch of top of the rear wing below the rear deck edge. Thanks.

(Click thumbnail to enlarge)

 
Do you have any more pictures Ray? I'm having trouble seeing it, maybe it is the angle...

From what I can see it looks pretty good, but I;d get lots more opinions.
 
Ray, how about some shots of the other side?

Oops!! TD said that already.....
 
Here is another shot. At the lowest point the fender is 3/32" below the rear deck edge.

(click to enlarge)
 
Well I finally got it to align after a little King Kong here and a little King Kong there. Seems the wing flexes more then I would have guessed. I also found a picture of the car before restoration and could see that the rear deck was a little higher then the top of the fender.
 
Back
Top