Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6oldtimer
Darth Vader
Offline
Years, no a life time ago, the bracket on the drivers door for the stop broke. Well now I am in the process of fixing it and putting on a new skin to correct other damage on the door.
Well, I fabricated a new bracket, did some compression on the old sheet metal, and test fitted.
Now I know why the old bracket broke.
Here is a shot of how it aligned up. Notice the door bracket is lower then the check strap.
Here it is when placed on the top of the now bent bracket, if fits very well.
Oh, I only used the screw to test the strap, so please, no one get excited about it.
At first I thought it was the door, as years ago it was replaced. But no, it matches the passenger side and fits well into the door frame. Then I took some measurements, and found the check strap was actually mounted in the "A" post 1/4-3/8" higher on the driver's side then on the passenger's.
I guess I will straighten the bracket, fabricate a spacer, and mount it on top where it will not bind.
Here is a shot of the back side of that check strap bracket which I have yet to weld in.
and no, I do not plan to reposition it.
Bummer...
Have any of you noticed this little oddity?
Well, I fabricated a new bracket, did some compression on the old sheet metal, and test fitted.
Now I know why the old bracket broke.
Here is a shot of how it aligned up. Notice the door bracket is lower then the check strap.
Here it is when placed on the top of the now bent bracket, if fits very well.
Oh, I only used the screw to test the strap, so please, no one get excited about it.
At first I thought it was the door, as years ago it was replaced. But no, it matches the passenger side and fits well into the door frame. Then I took some measurements, and found the check strap was actually mounted in the "A" post 1/4-3/8" higher on the driver's side then on the passenger's.
I guess I will straighten the bracket, fabricate a spacer, and mount it on top where it will not bind.
Here is a shot of the back side of that check strap bracket which I have yet to weld in.
and no, I do not plan to reposition it.
Bummer...
Have any of you noticed this little oddity?
