-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR6 TR6 Clutch knocking noise problem [not mine] *DELETED*
- Thread starter Brosky
- Start date
Share this page
R6MGS
Obi Wan
Offline
Re: TR6 Clutch knocking noise problem [not mine]
My MGA made a similar noise when the release bearing wore down and needed to be adjusted...The MGA has an throw adjustment on the M/C that allows you to correct this. I don't see anything like that on my TR6 M/C but maybe it has it somewhere else? I know his release bearing is not worn, but maybe it's the fork travel distance is not adjusted properly for his new setup.
My MGA made a similar noise when the release bearing wore down and needed to be adjusted...The MGA has an throw adjustment on the M/C that allows you to correct this. I don't see anything like that on my TR6 M/C but maybe it has it somewhere else? I know his release bearing is not worn, but maybe it's the fork travel distance is not adjusted properly for his new setup.