• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 TR6 Clutch Attachment Bolts (Clutch Assembly to Flywheel)

Share this page

Rocky_LC

Rocky_LC

Jedi Trainee
Country flag
Offline
I am renewing the attachment bolts on my clutch assembly. These are the ones that attach the clutch assy/pressure plate to the flywheel (6 bolts).

I know they are 5/16” UNF.

Is there anything special about them? Can I just use grade 8 bolts?

Thanks -

Rocky
 
Rocky_LC said:
I am renewing the attachment bolts on my clutch assembly. These are the ones that attach the clutch assy/pressure plate to the flywheel (6 bolts).

I know they are 5/16” UNF.

Is there anything special about them? Can I just use grade 8 bolts?

Thanks -

Rocky
Click to expand...
Make sure they are correct length. Never to long..
Best if they have a nonthreaded shank.
Charley
 
Back
Top