-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6 TR6 brake pressure balance valve
- Thread starter smaceng
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
I believe so. The rear section of the MC feeds the front brakes.
BTW, that "valve" is known as a Pressure Differential Warning Actuator or PDWA for short. It isn't a valve at all, it never blocks or changes the flow of fluid. All it does is cause the switch to close when there is a large enough difference in pressure between front & rear brakes.
BTW, that "valve" is known as a Pressure Differential Warning Actuator or PDWA for short. It isn't a valve at all, it never blocks or changes the flow of fluid. All it does is cause the switch to close when there is a large enough difference in pressure between front & rear brakes.