• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 TR6 Bolt?

Share this page

P

PanP

Member
Offline
Hello, I caught the English car bug a little while back and purchased a 73 tr6. The car had been sitting for many years(but, absolutely no rust) so needed some attention. When I was done replacing the majority of the front suspension I found this bolt on the ground. Do not know where it came from or if it is even from the tr6. Does anybody recognize it? I only ask because, from my extensive restoration of early 67-69 Camaro's I can identify any nut or bolt. Thanks for any help. IMG_4524.jpgIMG_4523.jpg
 
Don't think it came from the 6
 
Whatever it is it looks like it went into a spire nut or maybe a captive nut.
There are a lot of spire nuts along the fenders, but the original bolts for those spire nuts had plain washers...maybe that one was used as a replacement.
 
That's what I originally thought, fender bolt, but have not found any missing. Thanks for your help poolboy.
 
Not a TR stock front suspension bolt, for anything on the front end. After all these years lots of random things end up on our cars so not a huge shock to find things like this, bit nothing to worry about?
 
Back
Top