• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 TR6 "B" Pillar seal installation

Share this page

B

bailee2

Jedi Hopeful
Offline
During my restoration I replaced the fuzzy door seals and they ended at the dash (about to the top of the door panel on both sides).
My question is should they continue up to the top of the windscreen as my friends TR250 does. Or does the fuzzy seal end and the "B" pillar seal began and runup to the top of the windscreen.
If so, how is it glued to the windscreen frame? How does it lay etc;
I cannot seem to find any documentation on this application.
I would appreciate any help.

I am down to small details such as this!!!
Thanks in advance.
/bcforum/images/%%GRAEMLIN_URL%%/cheers.gif
 
Re: TR6 "A" Pilar seal installation

Bailee 2, go all the way up to and under the alumimum top plate on the windshield frame and there is also a seal that goes on the face for the window to seal in the front, Moss #680-485, which you seem to already have. They are glued on first before putting the fuzzy seal on. Regular 3M rubber seal will work just fine.

Wayne
 
Re: TR6 "A" Pilar seal installation

The fuzzy seals should go in as one piece, from the B-pillar aluminum car, down, forward, up to the top of the windshield, under the aluminum cap there. They really don't require gluing in, the metal clip inside them is enough to hold them in place. There is an occasion when you might want to remove them.
 
Back
Top