• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR4/4A TR4A Door latch mechanism issues

Share this page

D

Djoslyn

Senior Member
Country flag
Offline
My drivers side door latch cover keeps popping off. How exactly is this supposed to be attached? It seems to me it might be a pressure fit, meaning mine is probably worn out.... Is there any way for me to fix this or do I need to get a replacement?







Thanks!

Dane
 
The pivot for the six-pointed cog is supposed to be peened over to retain the cover.

Good working locks are not that easy to find. I have the same problem and I drilled the centre ot the pivot 1/8in and put a thread in it. A flat headed screw now retains the cover quite well.

I added an L-shaped bracket at the side to get a slightly better fit.

You can run a bead of polyurethane sealant right around it to retain and seal it.

It quite useful to be able to get the cover off so as to lubricate and clean.
 
Back
Top