• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR4/4A TR4A Door latch mechanism issues

Share this page

D

Djoslyn

Senior Member
Offline
My drivers side door latch cover keeps popping off. How exactly is this supposed to be attached? It seems to me it might be a pressure fit, meaning mine is probably worn out.... Is there any way for me to fix this or do I need to get a replacement?







Thanks!

Dane
 
The pivot for the six-pointed cog is supposed to be peened over to retain the cover.

Good working locks are not that easy to find. I have the same problem and I drilled the centre ot the pivot 1/8in and put a thread in it. A flat headed screw now retains the cover quite well.

I added an L-shaped bracket at the side to get a slightly better fit.

You can run a bead of polyurethane sealant right around it to retain and seal it.

It quite useful to be able to get the cover off so as to lubricate and clean.
 
Back
Top