• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR4/4A TR4 Speedometer Cable

  • Thread starter Thread starter TRDejaVu
  • Start date Start date

Share this page

T

TRDejaVu

Guest
Guest
Offline
What route does the cable take from a non-od gearbox to the gauge?

Thanks
 
On my TR4A it curves up and under the steering column and then into the firewall. I don't think thre really is any other way to route it.
 
TR4A_IRS said:
...and then into the firewall...
Click to expand...

This is how the speedo & tach cables pass thru the firewall on my TR4:

Cables.JPG
 
Thanks guys, that's how mine is. Now how does it route on the other side of the firewall? Mine puts a lot of side load onto the back of the speedo, which makes the needle stick. If I reach under the dash while driving and pull the cable more straight then the needle releases.
 
Back
Top