• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR4/4A TR4 Cylinder Head Recognition

  • Thread starter Thread starter TRDejaVu
  • Start date Start date

Share this page

T

TRDejaVu

Guest
Guest
Offline
Following on from the spare engine post. The cylinder head that came with this engine doesn't appear to have 511695 stamped on it. How do I determine what modification state it actually is?

My current engine has a 511695 head, so I will swap that over if I have to.
 
Thanks Geo (and TeriAnn). It appears that I have acquired an early high port head (figure #2 on the list) in that job lot. First impressions are that it seems to be in good condition, although magnafluxing etc will need to be done to confirm that. It came with a late TR4 engine, but perhaps an earlier one was used as the donor for the rebuild that the PO did.

I don't know whether to keep it as an emergency spare or put it on eBay in case there is someone who wants a period head that looks correct for judging; if indeed the external differences are looked at that closely.
 
Back
Top