-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR2/3/3A TR3b parking lamps
- Thread starter TFB
- Start date
Share this page
Geo Hahn
Yoda
Offline
For the stock set-up I believe you would have 2-wire sockets for the fron side lamps (parking lights) and turn signals. For the rear, one wire as those were only turn signals.
I have seen amber lenses used for the rear lamps -- possibly Euro-spec cars?
I changed my rear lamps to the 2-wire style so those inboard lights can be wired as both turn signals and brake lights -- giving me 4 brake light across the back. I went with LEDs in those for more flash and brightness.
I have seen amber lenses used for the rear lamps -- possibly Euro-spec cars?
I changed my rear lamps to the 2-wire style so those inboard lights can be wired as both turn signals and brake lights -- giving me 4 brake light across the back. I went with LEDs in those for more flash and brightness.