• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A TR3A Vacuum Advance Line

Share this page

Tinkerman

Tinkerman

Darth Vader
Offline
I'm getting ready to install a "rehabilitated" vacuum advance line I found in my spares box. During the clean up process I noticed that the fitting that attaches to the Carb had plumbers sealant residue on the threads. Is using a sealant in that spot a GOOD, BAD or DOESN'T MATTER idea?

Thanks, Tinkerman
 
Using a dab of "pipe dope" where the fitting screws into the carb body wouldn't hurt anything, and <span style="font-weight: bold">might</span> help. But mine is installed dry and never had a problem.
 
I use teflon tape without a problem. Jim
 
Back
Top