• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A TR3 wire wheels question

Share this page

mountainman

mountainman

Jedi Trainee
Offline
Has anyone use the knockoff whench that Moss sells. I am thinking about putting wire wheels on my Tr and wondered if the whench was all I would need or do I need a copper hammer also?
Thanks
Greg
 
By wrench I am assuming you mean the wooden template.

Yes I have used it - it's pretty good - just keep it centered on the center lug.

But you will need a hammer. I would pick up one of those lead filled plastic ones at Lowes for $10-$15.00.
 
A lead hammer or one of those dead blow plastic hammers will work fine without marring the knock-offs. Anything else such as copper or brass <span style="font-weight: bold">will </span>mar the knock-offs. I'm not trying to turn you off to the wooden wrench, but it really isn't unnecessary if you have the right hammer. Here's some info on the various types of hammers.

I've been using a fairly large plastic dead blow hammer and it has not marred any of the chrome on the knock-offs, and has worked very well to tighten and loosen the knock-offs.
 
I too use a dead blow -- the 3 lbs version from Harbor Freight.

It is plastic covered but to be sure that the ears are not damaged I use a piece of oak 1"x1"x10" as a drift. Easy as pie.
 
I use a pure lead hammer I got from Hendrix wire wheel in NC for the wifes MGB. The wing nuts were new when the car was restored and they still look that way. The wheels come off and get cleaned before every show, so they get beat on frequently and there isn't a hint of a mark on any of them. I'm getting one for the TF when it's finished. I'll use nothing else. But that's just me. PJ
 
Back
Top