• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A TR3 tranny, dipstick and fill

Share this page

T

tomgt6

Jedi Warrior
Offline
I am working on someones TR3A and the tranny has a dip stick how do I get it out. I can spin it but can't seem to pull it out.

Also I need to change the fluid. Drain is easy but do I need to take the tunnel off to refill it if not on what side is the fill plug and how do you guys get it filled with what gizmos. Or if I can get the dip stick out can I fill from there?

Thanks
 
ISTR that the dip stick has a cork or rubber stopper that seals it to the tranny. You will have to pry or pull it straight out. Refill is through the dip stick hole using a funnel.
 
thanks.
 
The tunnel carpet unsnaps and comes out. You will find a rubber plug to access the dipstick on the tunnel.

John
 
Back
Top