• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 seat belts

Share this page

R

rusty55

Jedi Hopeful
Offline
1st post here. We're doing the body work on the TR3 and need to figure out seat belt installation. 3 point would be great but I'm not sure they will work. Anyone done this?
 
Can't answer your question but welcome to the forum!

Oh, I just remembered that when I disasembled my '60 3A there were seat belt mounting points already on the body, four, one on each side of the seat. I plan on putting them back. What year is your car?

Tinkerman
 
Looking at my email just now and noticed that The Roadster Factory has a weekend special on seat belts. You might want to take a look at it. www.the-roadster-factory.com
Take a look at their web specials.

Regards, Tinkerman
 
After you look at the photos in the links above showing how I welded in the nuts for the seat belts in the green TR3A, here is a photo of the seat belts in my own black TR3A.
 

Attachments

  • 10595.jpg
    10595.jpg
    59.3 KB · Views: 256
When I purchased my 3 last spring, the dealer wanted to add competition belts so I could join him racing, but I did not have that in my plans, so I just went with lap belts. They are easy to hide at a show to make the car look closer to stock, and still give a slight bit of protection from ejections.
 
Great info guys and wow, nice and fast. I've searched around a bit and not found much on this. Your replys are much appreciated. It's hard to say what year my car is as I'm using 3 cars to make one, but I'm gonna go with '59 as that is the body and #s
 
Back
Top