• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A TR3 heater valve is leaking like a sieve

Share this page

Got_All_4

Got_All_4

Luke Skywalker
Country flag
Offline
My TR3 heater valve is leaking like a sieve. You know the kind that looks like a house water valve. Any way to rebuild these?
 
I found an O-Ring that fit in mine (in lieu of the packing in there) and it has worked fine for years since.

Sorry, do not know what size but take it to Ace hardware where they have lots of little drawers of them.

This is assuming the leak is coming up and out around the stem.

<span style="font-style: italic">Thinking back... I may have actually stacked 2 O-rings in there to get the desired effect.</span>
 
. . . . . .most likely the valve stem packing (kinda like string)or a rubber seal or o-ring. Take it off and bring it to your local hardware store (local ma-pa type, not big box), they should be able to help.
 
Back
Top