• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR2/3/3A TR3 engine hood wanted

Share this page

You should work out if you have the pre- or post-TS60000 body. The hood/bonnet, like almost every other panel on the car, changed at that point. Although the factory made the switch in late 59, many cars were sold and titled as being later years, so your '60' may have been made before the change.

You can add spacers under the hinges to make the early hood fit the later cars, but it would better to get the right hood. Practically any TR3 fan will spot the difference, even if they don't say anything.
 
Also do not forget that the letter holes changed between the early and late hoods. That would be a real mess to want to change from the ribbed letter holes to the smooth letter holes--very different. Randall states that the hinge mounting is different --early is flat and later is raised.
Charley
 
meyer's
I have a '59 bonnet with raised hinge plinths, pretty good shape, needs a little work on the under side of left front corner. Also have a perfect boot lid skin (no underside bracing), also with raised hinge plinths.

I am in Marysville WA. 35 miles north of you.
 
Back
Top