• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR2/3/3A tr3 dash brackets

Share this page

S

sp53

Yoda
Country flag
Offline
Hi all does anyone know what the little clip is for that is on the back of the dash brackets on a 61 tr3. I talked to a tr guru once and me maintained that they are for putting a clip on to hold the water temp tube in place? The picture is kinda ok the bracket is in the front.
Steve
 

Attachments

  • 19890.jpg
    19890.jpg
    84.3 KB · Views: 206
I believe that's for the bracket that helps hold up the glove box at the rear of the box.

Edit: There's another bracket for the choke cable, but that's more in the center IIRC.
 
If, by "back of the dash brackets," you mean the end away from the dash, then I agree with Art. It's bent -- it should be at a right angle -- but that's what it is.

If I were to refer to this part, I would call it the "front" of the bracket, as it is towards the front of the car. It's a good convention. "Front" = front of the car -- always.
 
Back
Top