• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A TR3 Bulkhead Sealer Plates

Share this page

martx-5

martx-5

Yoda
Country flag
Offline
I'm putting in the bulkhead sealer plates I got from TRF. I bent them to fit, and riveted on the rubber piece up top. My question is, when installed, does the rubber flap bend toward the back of the car or the front. It looks cleaner towards the back. I would also imagine that this plate has to be positioned after the wing is in place.
 
My 2cents on these is to use a little sealer(buytal based) along the edges to make it water proof, which is a good thing.Before you seal this off dont forget to use the rust protectant of your choice very liberally since some water will find its way in anyhow.....
MD(mad dog)
 
Back
Top