• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A TR3 Brake / Clutch Resevior & Lines needed

Share this page

A

Andy Mento

Freshman Member
Offline
I'm looking for a used Master Cylinder Brake / Clutch Resevior and the 2 lines that connect to the brake and clutch master cylinders. When attempting to remove the lines from the resevior I twisted base of the resevior and the lines that are now leaking fluid......................Andy
 
Few years ago, I tried to pick up a reservoir and MC bracket from a parts bin by tugging on one of those lines, not hard at all. The steel line snapped in my hand like it was spaghetti!

So I replaced both of them, and I suggest you do, too. You can buy the lines already bent and flared (with nuts of course) from the usual suspects (got mine from TRF); or else buy some Cunifer line and build them yourself. Cunifer bends and flares easily, and won't corrode.
 
Back
Top