• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 Brake / Clutch Resevior & Lines needed

Share this page

A

Andy Mento

Freshman Member
Offline
I'm looking for a used Master Cylinder Brake / Clutch Resevior and the 2 lines that connect to the brake and clutch master cylinders. When attempting to remove the lines from the resevior I twisted base of the resevior and the lines that are now leaking fluid......................Andy
 
Few years ago, I tried to pick up a reservoir and MC bracket from a parts bin by tugging on one of those lines, not hard at all. The steel line snapped in my hand like it was spaghetti!

So I replaced both of them, and I suggest you do, too. You can buy the lines already bent and flared (with nuts of course) from the usual suspects (got mine from TRF); or else buy some Cunifer line and build them yourself. Cunifer bends and flares easily, and won't corrode.
 
Back
Top