• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A TR2 Chassis Clips

Share this page

C

colbtr

Freshman Member
Country flag
Offline
Hi all

I am restoring a TR2 and there is a clip on the outside of the chassis behind the rearmost axle limit strap bolt. I can't work out what it is for. I will need to remove the clip as it now interferes with the axle limit strap but not sure if I need to replace it. I have attached a photo (I hope!).

Col
 

Attachments

  • IMG_8119.jpg
    IMG_8119.jpg
    50.3 KB · Views: 133
You can get those fuel line clips at Moss or the big 3 I should say. The Moss catalog is the clearest to read, but they all have them online.
 
Yes...it's for your fuel line, but it is a clip inside a hole and will easily pop out. Save it for later, though. Graham is right, if it is on the right side. If it's on the left, then I think it was in the wrong hole, as the fuel line runs much farther forward on the left.
 
It is kinda a general clip, brake lines, fuel lines, od cable under the car, if it is a breather clip turn it 90. Those clips can be a pain. Like with the breather, put the clip next to the line and turn the clip onto the piece. Sometime popping the line into clip works also.
 
Back
Top