• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
  • NOTICE: This "Classifieds" forum is expressly for posting items for sale or wanted. Post any technical question in the appropriate marque forum!

    IMPORTANT: Please be aware that there are a lot of scammers on forums like this, so please exercise due diligence as we can't be responsible for transactions between members. See this thread for at least one type of scam to be aware of: Private Message Scam (there may be others)
    If you are suspect of a member being a scammer, please send me a PM with details.

Tips
Tips

Wanted TR2 brakes

Share this page

R

raskas

Member
Country flag
Offline
Hey Guys

im after a RH rear brake backing plate for TS8608. ive got the LH one, it looks to be a 10" type 80012/2LH is stamped on it.

Regards Cam Bayliss
 
Correct TR2 backing plate at the rear would be 9 inch. Better check if it is still the original Lockheed set up or if a later Girling rear end was used so you know what you need.

Dan
 
raskas
I probably have what ever size you need, let me know wether 9" or 10" and wether or not you can wait a week or two for me to cover it! $25 plus shipping or $35 all in. You would need to sand blast / clean up.
248 761 2673
 
Hey Adcronin

ive included a pic of what i have, i think its one 9"and one 10" both have LH stamped on them, so ill need a right hand one. If you have a 10" ill take it as ive only got 10"drums so that is more likely to be correct. Get back to me on a price, im on the other side of the planet to you in New Zealand so that shipping price my be different.

Thanks for the reply

Cam



IMG_0747.jpg
 
Hey Dan thanks for replying, ive got TS8608, so has the later 10" rear lockheed setup

Cam

2long said:
Correct TR2 backing plate at the rear would be 9 inch. Better check if it is still the original Lockheed set up or if a later Girling rear end was used so you know what you need.

Dan
Click to expand...
 
Thanks Cam - my mistake. Mine is TS 1911 so I thought they were all 9 inch!

Dan

P.S. I have a Lockheed differential on its way to me, with backing plates. If the backing plates are 10 inch, I won't need them and you are welcome to the rhs one. The diff is en route via ship to me so it may be a bit before I can see what backing plates it has.
 
Sounds good Dan

Maybe i should come and collect it in person !

Cam
2long said:
Thanks Cam - my mistake. Mine is TS 1911 so I thought they were all 9 inch!

Dan

P.S. I have a Lockheed differential on its way to me, with backing plates. If the backing plates are 10 inch, I won't need them and you are welcome to the rhs one. The diff is en route via ship to me so it may be a bit before I can see what backing plates it has.
Click to expand...
 
Back
Top