• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR 3 Upper Column Felt Bush

Share this page

Tinkerman

Tinkerman

Darth Vader
Offline
I just finished installing the steering column, YEA, and was pushing the felt bush into the upper column. I got to wondering if that felt bush should be oil impregnated or lubricated in some way?

Your thoughts greatly appreciated, Tinkerman
 
Dick when I did mine I installed it dry. It worked fine. (I think)
 
I think it should have a dry lube, like graphite. Any oil/grease will collect dirt and gum up -it might make it even harder to turn the wheel.
 
I used powdered MoS2 on mine, but graphite is recommended.
 
I used a 6 inch piece of cotton rope 3 years ago and it seems to be holding up nicely and I drive the car weekly. Bill C. Mesa, Az.
 
Randall where would I find MoS2? I can do powdered graphite, I think I can get that at the local hardware store. I just feel that it needs something. I read that paragraph in the manual but found no other reference to it. That's the reason for my question.
What is "colodial" graphite?

Thanks, Tinkerman
 
I think the hardware store will have molybdenum disulfide (try saying or typing that fast!), I thought it was a pretty common dry lube for locks, etc.
 
"colloidal" graphite refers to finely powdered graphite mixed with a carrier like alcohol. "Lock Ease" is one common brand name.

Moly is a little harder to find, as it's rather more expensive. Generally, the stores will only have it mixed with graphite (eg MolyKote, Dri-Slide). But here's one source of it in aerosol (colloidal) form:
https://www.grainger.com/Grainger/items/2F138

I also have a stash of it in powder form; remains of a can of spray similar to the CRC product, that dried up long ago.
 
Back
Top