I have sanded, prepped and painted my TR-3 fuel tank. I believe the two bridges or saddles on the left and right had felt on them. There was some pitting on the exterior of the tank on the bottom which leads me to believe it touched the pan in the car. Should it touch? Should it have felt under the tank body where it may touch the pan or just on the two saddles/bridges? Thanks Tom
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR2/3/3A TR-3 Gas Tank install
- Thread starter Arrow
- Start date
Share this page
Offline
Aloha,
There is a felt material that goes under the tan and the securing straps to prevent chaffing of a metal to metal contact.
Here is a link the Moss catalog page showing them (item 6):
https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29125
There is a felt material that goes under the tan and the securing straps to prevent chaffing of a metal to metal contact.
Here is a link the Moss catalog page showing them (item 6):
https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29125
