• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Torque specification on large pitman arm nut

sp53

Yoda
Country flag
Offline
I have been looking around for Torque specification on large pitman arm nut, but cannot find any. I am thinking about 80 to 100 should work?
 
Sounds good to me. I think Mark Macy gives 80 ftlb on his web site, but I used 100 and it seemed to work fine.
 
Back
Top