• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Tip to remove the BMC on a '70 Midget

Share this page

E

EastTXMidget

Freshman Member
Offline
Not to long ago I think I remember finding a thread that gave a tip on removing the Brake Master Cylinder from the pedal box. I can't seem to find it in the list. Is the a tip to getting the bottom bolt off with out having to remove the pedal box?
 
Remove the cover plate, if you have one. then, remove the circlip from the clevis pin, remove the clevis pin and the 2 bolts that hold the mc to the pedal box. Disconnect the line and the mc should lift out.
 
For the second time now I read the title and think it has to be about a Japanese engine conversion since that's the only thing that I think could remove the British Motor Corporation (BMC) from the car - /bcforum/images/%%GRAEMLIN_URL%%/grin.gif
 
/bcforum/images/%%GRAEMLIN_URL%%/iagree.gif Me too!! /bcforum/images/%%GRAEMLIN_URL%%/grin.gif .
 
I need some tips for removing the "Leyland" from my "British" in my '79 midget.
 
Morris said:
I need some tips for removing the "Leyland" from my "British" in my '79 midget.
Click to expand...

If it was me, I would remove the rumph first.

Pat
 
Put in a 1275...? /bcforum/images/%%GRAEMLIN_URL%%/smile.gif
 
Back
Top