• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Timing Marks

Share this page

M

MikeH

Jedi Hopeful
Offline
Hi All, For some reason, I can only see the TDC pointer when timing. Possibly the wrong crank shaft pulley? I should be able to see all five points, TDC, 5, 10, 15, and 20; right? Thanks, Mike

71 MGB OD & Wires
63 TR4 Surrey Top
 
The points are welded underneath the and on the timeing chain cover, some have more teats than others. a small v is cut in the pulley.
 
Yes, I know, but looking at the bottom of the pulley from the front, only the TDC is visable. Mike

71 MGB OD & Wires
63 TR4 Surrey Top
 
Well that's a start, surely can wing it from there. Timeing does change a bit as things get worn in any case so the marks are only a place to start.
 
The pointer could have been bent at some point in the thirty-five odd years of history. You ~may~ find taking time to use a screwdriver as a leverage tool and some scrubbing around on your back to do the task worthwhile. That said, I'd be inclined to "memorize" the distance 8 degrees is from the visible TDC mark and "wing it."

Most of my MGB's got a second pointer installed on TOP of the pulley, via a timing cover bolt and a distinct groove in the pulley. Pointer made from a wire coat hanger and "indexed" with dial indicator and degree wheel.

All to eliminate the flopping around like a caught carp. /ubbthreads/images/graemlins/wink.gif
 
Excuse me if I am misunderstanding, but there should only be one mark ON the pulley and the guage marks are on the timing guage attached to the engine...no??? /ubbthreads/images/graemlins/confused.gif

Bruce /ubbthreads/images/graemlins/cheers.gif
 
Yep, one mark on pully a cut v in the front part. Guage marks,the teet things, pointers, are on the timeing cover behind the pulley welded on.
 
Back
Top