Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
PatGalvin
Jedi Warrior
Offline
Easy on for you guys.
Install timing cover seal with spring and thicker(smaller diameter) rubber ring facing inward toward crank gear? That is the orientation of the seal I removed. Will to difficult to remove next time, as that puts the thin metal band inward so there is nothing against which to press to hammer out your seal. Just wanted to be sure. Thanks
Pat
Install this side facing inward toward crank?
Install this facing outward, pressed into cover?
Install timing cover seal with spring and thicker(smaller diameter) rubber ring facing inward toward crank gear? That is the orientation of the seal I removed. Will to difficult to remove next time, as that puts the thin metal band inward so there is nothing against which to press to hammer out your seal. Just wanted to be sure. Thanks
Pat
Install this side facing inward toward crank?
Install this facing outward, pressed into cover?
