This stuff I have seen.

[jlaird]

It is from Eastwood and works for years on your exhaust manifold. Comes in Gray, silver, etc.

Noticed it first at a car show.


Factory Gray Hi-Temp Coating 11.75oz aerosol
Now the same great 1200 degree performance of our original High Temp Manifold Coating is available in convenient aerosol packaging. Each can is sufficient to coat 2 standard cast iron manifolds or about 6 square feet. 2 cans recommended for header systems. Click Here For Tech Tips Do you have a product ... $15.99
Item No. 10395 Z

 

[Trevor Jessie]

I've also had good luck with VHT
https://www.caswellplating.com/vht/vht_high.htm

Usually available at better autoparts stores.

 

[healeyboz]

I use the same stuff.

 

[zimmy]

Oreillys stock a good pile of high temp paints....
i used the 600(?) degree on my motor,...looks good...z

 

[regularman]

I used a rustoleum high temp outdoor grill paint with some kind of high temp additive in it. Its what was available at the time. I sand blasted it first. I hope it lasts becuase it looks good.

 

[John Moore]

I've tried it all, from the Eastwood Header paint, to the duplicolor High Temp paint, etc, etc. No matter how well I blasted and cleaned my cast iron headers, rust flecks would appear.

Finally, I bit the bullet and jet coated my exhaust and intake manifolds! Beautiful.

 

[regularman]

I've tried it all, from the Eastwood Header paint, to the duplicolor High Temp paint, etc, etc. No matter how well I blasted and cleaned my cast iron headers, rust flecks would appear.

Finally, I bit the bullet and jet coated my exhaust and intake manifolds! Beautiful.

Jet coated?

 

[John Moore]

Here's a photo. You can get it in grey too. I went for the ultra bling silver!

 

[John Moore]

Jet coated?

Sorry.. Jet-Hot

https://www.jet-hot.com/

Oh yeah... give them a call, they will send you all sorts of cool propagranda and even a DVD!

 

[regularman]

What kind of exhaust manifold is that? Mine doesn't look like that. You got a split manifold :thumbsup:

 

[John Moore]

What kind of exhaust manifold is that? Mine doesn't look like that. You got a split manifold :thumbsup:

That's an MGB Engine. :laugh:

 

[regularman]

What kind of exhaust manifold is that? Mine doesn't look like that. You got a split manifold :thumbsup:

That's an MGB Engine. :laugh:

Oh, that explains it.

 

[zimmy]

how much does that jet hot sterling silver cost?
i might wanna check it out as it looks like chrome....zimmy

 

[mccalebr]

To Jet-Hot my LCB they charged $165 + $24 for shipping then gave me a discount of $16.50 (10%)...not sure why on the discount, but I'll take it! I like the way it came out.

Ray

 

[John Moore]

As I recall for the intake and exhaust manifolds it was $200ish.

But the engine bay temps are much much cooler. You could practically touch the header.

 

[Whitephrog]

<span style="font-style: italic">It is from Eastwood and works for years on your exhaust manifold. Comes in Gray, silver, etc.

Noticed it first at a car show.


Factory Gray Hi-Temp Coating 11.75oz aerosol
Now the same great 1200 degree performance of our original High Temp Manifold Coating is available in convenient aerosol packaging. Each can is sufficient to coat 2 standard cast iron manifolds or about 6 square feet. 2 cans recommended for header systems. Click Here For Tech Tips Do you have a product ... $15.99
Item No. 10395 Z</span>



Jack

I tried this stuff and wasn't very happy with the results. No matter how much I shook the can it still didn't mix well and it was runny.

 

[Branson]

ooh! Ultra bling silver!!!