• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR4/4A The "silicone type" valve cover gasket?

Share this page

K

karls59tr

Obi Wan
Bronze
Country flag
Online
I have one that I would like to use instead of the standard cork gasket but it appears that I will need to fasten it to the valve cover. What product can I use to do this...something compatible to the silicone?
 
I am using two of these on my TR4's. I do not fasten them to ether side. I will admit that they are the older /original style that has an outer ridge that may well help to keep in it place.
Charley
 
Karl,
I use Permatex Ultra Gray and attach it to the valve cover letting it sit on a granite counter until it cures. It gives a dead level gasket that does not leak. I also use a touch of grease along the edge that contacts the head to create a better seal.
Rut
 
I believe the Ultra Gray is silicone based and will bond to the gasket. I would avoid sealants that are not silicone. Tom
 
Back
Top