• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

TR4/4A The "silicone type" valve cover gasket?

Share this page

K

karls59tr

Yoda
Bronze
Offline
I have one that I would like to use instead of the standard cork gasket but it appears that I will need to fasten it to the valve cover. What product can I use to do this...something compatible to the silicone?
 
I am using two of these on my TR4's. I do not fasten them to ether side. I will admit that they are the older /original style that has an outer ridge that may well help to keep in it place.
Charley
 
Karl,
I use Permatex Ultra Gray and attach it to the valve cover letting it sit on a granite counter until it cures. It gives a dead level gasket that does not leak. I also use a touch of grease along the edge that contacts the head to create a better seal.
Rut
 
I believe the Ultra Gray is silicone based and will bond to the gasket. I would avoid sealants that are not silicone. Tom
 
Back
Top