• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

T-Series TD crank journal sizes

Share this page

Marvin Gruber

Marvin Gruber

Yoda
Offline
Picked up a TD drive train last week. Pulled the crank out. I don't have a manual for sizes. Would someone Please post the main and rod journal sizes. Want to see if this crank is any good.

Thanks

Marv
 
Marv,
Crankpin diameter standard 1.772"
Crankpin minimum diameter for regrind 1.722"
Standard main journal diameter 2.047"
Main journals frist regrind diameter 2.027"
Main journals second regrind diameter 2.007"
Hope this helps and have a good day!

John
 
Weld it up and start over at .STD size.

Cheap at twice the cost, eh?

I remember doing a .080" on rods on a flatmotor with a flat crank.
In the days when I didn't have a barn full of flatmotor bits.

Machine shop didn't want to spin it .080, but they did, worked fine.
 
Back
Top