• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

SU Mix Adjust Memory Refresh

Share this page

Yup. From the underside a clockwise turn is leaning the mix (by raising the jet).
 
:iagree:
Afterwards, I always push up on the jet a little, just to be sure it's still in contact with the nut.
 
Come to think of it I've heard that mentioned before but forgot to push up on the jet.....what could happen if you neglected to do that?
 
karls59tr said:
Come to think of it I've heard that mentioned before but forgot to push up on the jet.....what could happen if you neglected to do that?
Click to expand...

Sometimes the jet can be "grandfather'd in" by gunk. Pushing it up just insures the spring has had enough oompf to overcome any stuck condition.
 
Otherwise, you turn the nut a flat or two, which isn't enough, then you go another flat or two, still not enough, then some more ... by the time I realize that the jet isn't moving I've forgotten where I started.
 
:lol:
 
Back
Top