• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

General Tech SU HS6 Carb Float Adjustment

Share this page

KVH

KVH

Darth Vader
Silver
Country flag
Online
Was there a consensus that setting the float at a 1/8 inch gap between the float and the float bowl lid when inverted is still considered correct, or did we conclude that there should be a wider gap?

My floats have about 1 inch of fuel in the bowls when I remove the lid and float, but my lid/float gap is more like 5/16 of an inch. If I reduce to spec, 1/8th, I’ll be adding quite a bit more fuel. But right is right, so I’m curious.
 
KVH said:
Was there a consensus that setting the float at a 1/8 inch gap between the float and the float bowl lid when inverted is still considered correct, or did we conclude that there should be a wider gap?

My floats have about 1 inch of fuel in the bowls when I remove the lid and float, but my lid/float gap is more like 5/16 of an inch. If I reduce to spec, 1/8th, I’ll be adding quite a bit more fuel. But right is right, so I’m curious.
Click to expand...
I can not state any consensus. I would guess that the owners with HS6 carbs is a small percentage, maybe very small of TR owners.
But I have your answer from SU as found on one of their parts sheets for the HS6 carbs.
The answer is 3/16".
Charley
 
charleyf said:
I can not state any consensus. I would guess that the owners with HS6 carbs is a small percentage, maybe very small of TR owners.
But I have your answer from SU as found on one of their parts sheets for the HS6 carbs.
The answer is 3/16".
Charley
Click to expand...
P.S. That is what I have my 3 TRs with HS6 carbs set at..Charley
 
Back
Top