• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Stuck 25D4 Distributor

Share this page

Well folks, the distributor is now turning freely. It took my mechanic almost an hour to work that thing free and clean it up. The vacuum advance didn't do well during the process and had to be replaced.

Thanks for your help,
Obtong

[ 01-14-2003: Message edited by: Obtong ]</p>
 
Ya' shoulda' brought it here!!
grin.gif
 
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Obtong:
Well folks, the distributor is now turning freely. It took my mechanic almost an hour to work that thing free and clean it up. The vacuum advance didn't do well during the process and had to be replaced.

Thanks for your help,
Obtong

[ 01-14-2003: Message edited by: Obtong ]<hr></blockquote>

Con'grats! So do tell us - how'd your machanic get it lose?

cheers.gif
 
I think the shop manual recommends putting a little grease at the bottom of the shaft where it connects to the distributor drive shaft to keep it from doing that. Fair warning to all who pull their distributor to see if its stuck!
 
How did he free the distributor? Well, he first removed the wires and cap. He applied heat to the engine block, and then used a wrench that looked like a chain on a metal stick. He'd tap the distributor, and then try to twist one way, then the other. The distribuor slowly worked itself free. Like you folks, he suggested that the distributor be removed and cleaned when changing points.

Obtong
 
Back
Top