• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR4/4A Stromberg..."coupler" that links vacuum outlet to diff vacuum line is N/A?

karls59tr

Obi Wan
Bronze
Country flag
Offline
Anyone have any ideas on fabricating this small piece that is bigger at one end than the other. Moss catalogue Ignition/Distributor part # 27. Any McGuyvers out there?
 
Re: Stromberg..."coupler" that links vacuum outlet to diff vacuum line is N/A?

Is just a bit of flexible tubing? Or is that just how some PO fixed mine?
 
Re: Stromberg..."coupler" that links vacuum outlet to diff vacuum line is N/A?

Going by memory here.
I seem to remember using as Tr6 straight vacuum connector (Moss #379-370) and opening up one end with a dill bit to accommodate the fitting at the carb.

M.
 
Re: Stromberg..."coupler" that links vacuum outlet to diff vacuum line is N/A?

That's probably a better idea; but you could also check at FLAPS and see if they carry something like this
47308-007.jpg~original

https://www.oreillyauto.com/site/c/...=Search_N1168_1494133_3212&pt=N1168&ppt=N1171
 
Back
Top